Spare Gunpla Parts

Taken last week in Akiba. A shop that sells bags of spare Gunpla parts! If only I knew about this shop sooner then I wouldn't have had to bother sending an order form off to Bandai asking for replacement parts by snail mail.
In the past I've broken the waist of my PG MK2, Face and fingers of my PG GP01 and some others which I forget.
Todays question is whether you have broken or lost bits of your models during assembly and what you end up doing about it. But before the polls, have a gander at the rest of the photos.

Cant remember if the name of the shop was "Parts Paradise" or whether it was just the name of the bag O parts. When you get out of Akihabara station, walk into the old building above the new Kotobukiya shop - its on the 4th floor.
If you are a Doujin person - its in the same building as Melon Books.

Different subject - Gunpla water decals - I need to go back to Asobit to get some. I like the way Bandai includes nasty stickers with the kit and make you pay about 500 yen more for decent ones.

For those who love Gundam - you can say you are "Gundam Inochi" (ガンダム命(がんだむいのち))which means you devote your life to Gundam. You can stick "Inochi" on the end of a noun to say that you devote your life to X. So for example, "Moe Inochi" means that you lurve Moe.

My booty for the day. Wing Gundam, cans of paint, some doujinshi and an illustration book by illustrator Happoubijin (八宝備仁) - he does a lot of ero stuff. Also received an MG archive with pics of all 99 MG Gundams - a small announcement inside says that they will announce the 100th MG at the Shizuoka Hobby Show (I plan on attending if I dont fall sick again ^^;)
If you are interested in reading about life in Japan, seeing photos taken daily around Tokyo, like Japanese subculture (anime, manga, figures, Dollfies) then you may want to start delving into the Japan or Figure categories for a start or have a gander at all photo articles.
If you don't have much time now, maybe subscribe to the RSS Feed, Twitter Feed or join the other readers in the FaceBook Page.
Alternatively, you may want to read more about the site.
If you are a regular reader then this message will probably annoy you each time - hide it forever.
-Akihabara News – Gadgetry from Japan (Subscribe)
























Geek Liaison
http://www.thegeekreview.com
Man I wish I could find a model store like that. The few Hobby shops that are near me are mostly RC stuff with little in the way of plastic model supplies. I haven't been able to find a great shop online either, found several good ones but in order to get everything I need had to order from 3 or 4 different places. I may have to end up traveling to Sacramento or San Francisco to find some that even comes close to that store.
Geek Liaison
http://www.thegeekreview.com
Man I wish I could find a model store like that. The few Hobby shops that are near me are mostly RC stuff with little in the way of plastic model supplies. I haven't been able to find a great shop online either, found several good ones but in order to get everything I need had to order from 3 or 4 different places. I may have to end up traveling to Sacramento or San Francisco to find some that even comes close to that store.
Geek Liaison
http://www.thegeekreview.com
Man I wish I could find a model store like that. The few Hobby shops that are near me are mostly RC stuff with little in the way of plastic model supplies. I haven't been able to find a great shop online either, found several good ones but in order to get everything I need had to order from 3 or 4 different places. I may have to end up traveling to Sacramento or San Francisco to find some that even comes close to that store.
Geek Liaison
http://www.thegeekreview.com
Man I wish I could find a model store like that. The few Hobby shops that are near me are mostly RC stuff with little in the way of plastic model supplies. I haven't been able to find a great shop online either, found several good ones but in order to get everything I need had to order from 3 or 4 different places. I may have to end up traveling to Sacramento or San Francisco to find some that even comes close to that store.
Troubleshooter, Universal Exports
http://funkyblueame.tumblr.com/
I could really use a trip to this shop right now, need to replace parts for my MG GPO2. It's the special paint version, so I might need to get the parts from Bandai. I can see a Ball! For some reason i want to build a Ball... ^^;
The GPO2 kit was a gift so I really want to complete it so it can be seen. I've been lucky in the past and had pen pals - before I met my fiancee - who would get replacement parts for me. Although, a few times I have put kits aside and never finish building. ^^; For broken parts, I usually repair them.
Troubleshooter, Universal Exports
http://funkyblueame.tumblr.com/
I could really use a trip to this shop right now, need to replace parts for my MG GPO2. It's the special paint version, so I might need to get the parts from Bandai. I can see a Ball! For some reason i want to build a Ball... ^^;
The GPO2 kit was a gift so I really want to complete it so it can be seen. I've been lucky in the past and had pen pals - before I met my fiancee - who would get replacement parts for me. Although, a few times I have put kits aside and never finish building. ^^; For broken parts, I usually repair them.
Troubleshooter, Universal Exports
http://funkyblueame.tumblr.com/
I could really use a trip to this shop right now, need to replace parts for my MG GPO2. It's the special paint version, so I might need to get the parts from Bandai. I can see a Ball! For some reason i want to build a Ball... ^^;
The GPO2 kit was a gift so I really want to complete it so it can be seen. I've been lucky in the past and had pen pals - before I met my fiancee - who would get replacement parts for me. Although, a few times I have put kits aside and never finish building. ^^; For broken parts, I usually repair them.
Troubleshooter, Universal Exports
http://funkyblueame.tumblr.com/
I could really use a trip to this shop right now, need to replace parts for my MG GPO2. It's the special paint version, so I might need to get the parts from Bandai. I can see a Ball! For some reason i want to build a Ball... ^^;
The GPO2 kit was a gift so I really want to complete it so it can be seen. I've been lucky in the past and had pen pals - before I met my fiancee - who would get replacement parts for me. Although, a few times I have put kits aside and never finish building. ^^; For broken parts, I usually repair them.
otaku
http://dugfresh.net
it would be nice to be able to get spares here in ak, but no good shops..
i dont know if you seen this site before, but it sells models from japan as well as parts.
HobbyLink japan;
http://www.hlj.com/index.html
parts for gunpla's are here; http://www.hlj.com/hljlist2/?MacroType=DetAcc&SeriesID=All&x=1&y=9&Dis=-2&GenreCode=Gun
i might order from there later on, they got a good selection of gunpla.
otaku
http://dugfresh.net
it would be nice to be able to get spares here in ak, but no good shops..
i dont know if you seen this site before, but it sells models from japan as well as parts.
HobbyLink japan;
http://www.hlj.com/index.html
parts for gunpla's are here; http://www.hlj.com/hljlist2/?MacroType=DetAcc&SeriesID=All&x=1&y=9&Dis=-2&GenreCode=Gun
i might order from there later on, they got a good selection of gunpla.
otaku
http://dugfresh.net
it would be nice to be able to get spares here in ak, but no good shops..
i dont know if you seen this site before, but it sells models from japan as well as parts.
HobbyLink japan;
http://www.hlj.com/index.html
parts for gunpla's are here; http://www.hlj.com/hljlist2/?MacroType=DetAcc&SeriesID=All&x=1&y=9&Dis=-2&GenreCode=Gun
i might order from there later on, they got a good selection of gunpla.
otaku
http://dugfresh.net
it would be nice to be able to get spares here in ak, but no good shops..
i dont know if you seen this site before, but it sells models from japan as well as parts.
HobbyLink japan;
http://www.hlj.com/index.html
parts for gunpla's are here; http://www.hlj.com/hljlist2/?MacroType=DetAcc&SeriesID=All&x=1&y=9&Dis=-2&GenreCode=Gun
i might order from there later on, they got a good selection of gunpla.
security/3d graphic artist
http://www.kennethleishman.com/
oh yes i've lost model parts to the blackhole of my carpet.. usually have to deal with it not being there, steal it from my spares box ( for some reason bandai adds extras on there sprues) or scratch build it (no shops here in FL)
If I would ever get a chance to go to japan, I would breing an extra suitcase just to fill with Gundams and figures
security/3d graphic artist
http://www.kennethleishman.com/
oh yes i've lost model parts to the blackhole of my carpet.. usually have to deal with it not being there, steal it from my spares box ( for some reason bandai adds extras on there sprues) or scratch build it (no shops here in FL)
If I would ever get a chance to go to japan, I would breing an extra suitcase just to fill with Gundams and figures
security/3d graphic artist
http://www.kennethleishman.com/
oh yes i've lost model parts to the blackhole of my carpet.. usually have to deal with it not being there, steal it from my spares box ( for some reason bandai adds extras on there sprues) or scratch build it (no shops here in FL)
If I would ever get a chance to go to japan, I would breing an extra suitcase just to fill with Gundams and figures
security/3d graphic artist
http://www.kennethleishman.com/
oh yes i've lost model parts to the blackhole of my carpet.. usually have to deal with it not being there, steal it from my spares box ( for some reason bandai adds extras on there sprues) or scratch build it (no shops here in FL)
If I would ever get a chance to go to japan, I would breing an extra suitcase just to fill with Gundams and figures
College Student
Oh man, if only we had a store even remotely similar to Gunpla heaven. My PG AEUG MkII only has one spare beam rifle E-pac due to me throwing out the pieces for the other by accident, and my Hyper Bazooka's handle just plain snapped off.
And I won't even get started on the rest of my MG's... orz
College Student
Oh man, if only we had a store even remotely similar to Gunpla heaven. My PG AEUG MkII only has one spare beam rifle E-pac due to me throwing out the pieces for the other by accident, and my Hyper Bazooka's handle just plain snapped off.
And I won't even get started on the rest of my MG's... orz
College Student
Oh man, if only we had a store even remotely similar to Gunpla heaven. My PG AEUG MkII only has one spare beam rifle E-pac due to me throwing out the pieces for the other by accident, and my Hyper Bazooka's handle just plain snapped off.
And I won't even get started on the rest of my MG's... orz
College Student
Oh man, if only we had a store even remotely similar to Gunpla heaven. My PG AEUG MkII only has one spare beam rifle E-pac due to me throwing out the pieces for the other by accident, and my Hyper Bazooka's handle just plain snapped off.
And I won't even get started on the rest of my MG's... orz
Salaryman
Does anybody know of a site that sells the water transfer decals online?
Salaryman
Does anybody know of a site that sells the water transfer decals online?
Salaryman
Does anybody know of a site that sells the water transfer decals online?
Salaryman
Does anybody know of a site that sells the water transfer decals online?
Illustrator
http://kent446.exblog.jp/
お店はイエローサブマリンのパーツパラダイスですね。
僕もMG シャア専用ズゴックのマーキングシールを
買ったことがあります。
同人誌は何を勉強?(*´д`*)
Illustrator
http://kent446.exblog.jp/
お店はイエローサブマリンのパーツパラダイスですね。
僕もMG シャア専用ズゴックのマーキングシールを
買ったことがあります。
同人誌は何を勉強?(*´д`*)
Illustrator
http://kent446.exblog.jp/
お店はイエローサブマリンのパーツパラダイスですね。
僕もMG シャア専用ズゴックのマーキングシールを
買ったことがあります。
同人誌は何を勉強?(*´д`*)
Illustrator
http://kent446.exblog.jp/
お店はイエローサブマリンのパーツパラダイスですね。
僕もMG シャア専用ズゴックのマーキングシールを
買ったことがあります。
同人誌は何を勉強?(*´д`*)
Student
Hey danny, just wondering what exactly is the name of this store and how do I get there *assuming from the JR Akiba station...*
I've been looking for a place like this for a long time :P
Student
Hey danny, just wondering what exactly is the name of this store and how do I get there *assuming from the JR Akiba station...*
I've been looking for a place like this for a long time :P
Student
Hey danny, just wondering what exactly is the name of this store and how do I get there *assuming from the JR Akiba station...*
I've been looking for a place like this for a long time :P
Student
Hey danny, just wondering what exactly is the name of this store and how do I get there *assuming from the JR Akiba station...*
I've been looking for a place like this for a long time :P
Student
nvm ignore the previous question, just saw your directions :P
Student
nvm ignore the previous question, just saw your directions :P
Student
nvm ignore the previous question, just saw your directions :P
Student
nvm ignore the previous question, just saw your directions :P
CEO MIrai Inc
http://www.dannychoo.com/profile/eng/
Reikai,
A note from Yoshimu-san below - its Yellow Submarine Parts Paradise. Same building as the Kotobukiya store.
よしむさん、
情報をありがとうございました!
同人誌は。。。エロ市場の勉強^^;
Mambo,
Some of the stores advertising on this site may carry them.
War God,
Yellow Submarine do have a store online but they dont sell parts AFAIK.
Space Cowboy,
I feel your pain.
CEO MIrai Inc
http://www.dannychoo.com/profile/eng/
Reikai,
A note from Yoshimu-san below - its Yellow Submarine Parts Paradise. Same building as the Kotobukiya store.
よしむさん、
情報をありがとうございました!
同人誌は。。。エロ市場の勉強^^;
Mambo,
Some of the stores advertising on this site may carry them.
War God,
Yellow Submarine do have a store online but they dont sell parts AFAIK.
Space Cowboy,
I feel your pain.
CEO MIrai Inc
http://www.dannychoo.com/profile/eng/
Reikai,
A note from Yoshimu-san below - its Yellow Submarine Parts Paradise. Same building as the Kotobukiya store.
よしむさん、
情報をありがとうございました!
同人誌は。。。エロ市場の勉強^^;
Mambo,
Some of the stores advertising on this site may carry them.
War God,
Yellow Submarine do have a store online but they dont sell parts AFAIK.
Space Cowboy,
I feel your pain.
CEO MIrai Inc
http://www.dannychoo.com/profile/eng/
Reikai,
A note from Yoshimu-san below - its Yellow Submarine Parts Paradise. Same building as the Kotobukiya store.
よしむさん、
情報をありがとうございました!
同人誌は。。。エロ市場の勉強^^;
Mambo,
Some of the stores advertising on this site may carry them.
War God,
Yellow Submarine do have a store online but they dont sell parts AFAIK.
Space Cowboy,
I feel your pain.
http://www.marvinryan.com
hmmm... 私はガンダム命,けれども私の妻がいます,私は妻命です. ^^
nice gunpla parts store Danny, I've lost and broke a few gunpla parts myself. including my GP01's hands. ^^ I tried replacing them with my non grade 1/60 strike gundam's hands but to no avail. Anyway, try to get some more vitamin C to boost up the immune system. hope you don't get sick again Danny.
http://www.marvinryan.com
hmmm... 私はガンダム命,けれども私の妻がいます,私は妻命です. ^^
nice gunpla parts store Danny, I've lost and broke a few gunpla parts myself. including my GP01's hands. ^^ I tried replacing them with my non grade 1/60 strike gundam's hands but to no avail. Anyway, try to get some more vitamin C to boost up the immune system. hope you don't get sick again Danny.
http://www.marvinryan.com
hmmm... 私はガンダム命,けれども私の妻がいます,私は妻命です. ^^
nice gunpla parts store Danny, I've lost and broke a few gunpla parts myself. including my GP01's hands. ^^ I tried replacing them with my non grade 1/60 strike gundam's hands but to no avail. Anyway, try to get some more vitamin C to boost up the immune system. hope you don't get sick again Danny.
http://www.marvinryan.com
hmmm... 私はガンダム命,けれども私の妻がいます,私は妻命です. ^^
nice gunpla parts store Danny, I've lost and broke a few gunpla parts myself. including my GP01's hands. ^^ I tried replacing them with my non grade 1/60 strike gundam's hands but to no avail. Anyway, try to get some more vitamin C to boost up the immune system. hope you don't get sick again Danny.
Student
Perfect so far ^^. it would be really scary if i'd lost already parts. I'm just about to paint my first gunpla =)
Student
Perfect so far ^^. it would be really scary if i'd lost already parts. I'm just about to paint my first gunpla =)
Student
Perfect so far ^^. it would be really scary if i'd lost already parts. I'm just about to paint my first gunpla =)
Student
Perfect so far ^^. it would be really scary if i'd lost already parts. I'm just about to paint my first gunpla =)
Student
btw that place sounds tempting :) might be worth visiting.
Student
btw that place sounds tempting :) might be worth visiting.
Student
btw that place sounds tempting :) might be worth visiting.
Student
btw that place sounds tempting :) might be worth visiting.
College student
Whoa, i know what gunpla means too from genshiken. Thats a handy anime. Yea, people like look at my kits and like drop it by accident. Of course i get pissed but i cant do anything about it to repair it. If only it had some spare parts somewhere...
College student
Whoa, i know what gunpla means too from genshiken. Thats a handy anime. Yea, people like look at my kits and like drop it by accident. Of course i get pissed but i cant do anything about it to repair it. If only it had some spare parts somewhere...
College student
Whoa, i know what gunpla means too from genshiken. Thats a handy anime. Yea, people like look at my kits and like drop it by accident. Of course i get pissed but i cant do anything about it to repair it. If only it had some spare parts somewhere...
College student
Whoa, i know what gunpla means too from genshiken. Thats a handy anime. Yea, people like look at my kits and like drop it by accident. Of course i get pissed but i cant do anything about it to repair it. If only it had some spare parts somewhere...
student
http://ald3nxxx.deviantart.com
im in a whole different category, my PG Wing Zero Custom came with a pair of metal pieces that were the same one. had so the store had to send an order for a replacement all the way back in japan. i was so relieved when i got the replacement ^_^;;
student
http://ald3nxxx.deviantart.com
im in a whole different category, my PG Wing Zero Custom came with a pair of metal pieces that were the same one. had so the store had to send an order for a replacement all the way back in japan. i was so relieved when i got the replacement ^_^;;
student
http://ald3nxxx.deviantart.com
im in a whole different category, my PG Wing Zero Custom came with a pair of metal pieces that were the same one. had so the store had to send an order for a replacement all the way back in japan. i was so relieved when i got the replacement ^_^;;
student
http://ald3nxxx.deviantart.com
im in a whole different category, my PG Wing Zero Custom came with a pair of metal pieces that were the same one. had so the store had to send an order for a replacement all the way back in japan. i was so relieved when i got the replacement ^_^;;
Retired zion colonel and part-time beach volley ball player
Broken many, latest victim was the HGUC Hazel, the plastic elbow joint was supposed to look better, but it was so flimsy that it broke the first moment I moved it. 20 years ago I probably would scratch build the joint, but spare time is at a premium these days, so I'll likely bury it soon. Totally staying away from these from now on.
Also disappointed that the MG are using more ABS parts and less p-cap/soft plastic for joints to supposedly strengthen the stance. It will be a big waste of money if anything on the Hi-nu broke...And please, Bandai, no unnecessary big box for those of us who have to pay shipping.
Bitching ended.
Retired zion colonel and part-time beach volley ball player
Broken many, latest victim was the HGUC Hazel, the plastic elbow joint was supposed to look better, but it was so flimsy that it broke the first moment I moved it. 20 years ago I probably would scratch build the joint, but spare time is at a premium these days, so I'll likely bury it soon. Totally staying away from these from now on.
Also disappointed that the MG are using more ABS parts and less p-cap/soft plastic for joints to supposedly strengthen the stance. It will be a big waste of money if anything on the Hi-nu broke...And please, Bandai, no unnecessary big box for those of us who have to pay shipping.
Bitching ended.
Retired zion colonel and part-time beach volley ball player
Broken many, latest victim was the HGUC Hazel, the plastic elbow joint was supposed to look better, but it was so flimsy that it broke the first moment I moved it. 20 years ago I probably would scratch build the joint, but spare time is at a premium these days, so I'll likely bury it soon. Totally staying away from these from now on.
Also disappointed that the MG are using more ABS parts and less p-cap/soft plastic for joints to supposedly strengthen the stance. It will be a big waste of money if anything on the Hi-nu broke...And please, Bandai, no unnecessary big box for those of us who have to pay shipping.
Bitching ended.
Retired zion colonel and part-time beach volley ball player
Broken many, latest victim was the HGUC Hazel, the plastic elbow joint was supposed to look better, but it was so flimsy that it broke the first moment I moved it. 20 years ago I probably would scratch build the joint, but spare time is at a premium these days, so I'll likely bury it soon. Totally staying away from these from now on.
Also disappointed that the MG are using more ABS parts and less p-cap/soft plastic for joints to supposedly strengthen the stance. It will be a big waste of money if anything on the Hi-nu broke...And please, Bandai, no unnecessary big box for those of us who have to pay shipping.
Bitching ended.
Tech support
Last thing I did was lost a couple of bits for my HG Hazel custom. Before that, the worst was breaking one of the fiddly arm pieces for my PG W-Gundam Zero Custom :( It would be nice if there were an easier way to get replacement parts!!
Tech support
Last thing I did was lost a couple of bits for my HG Hazel custom. Before that, the worst was breaking one of the fiddly arm pieces for my PG W-Gundam Zero Custom :( It would be nice if there were an easier way to get replacement parts!!
Tech support
Last thing I did was lost a couple of bits for my HG Hazel custom. Before that, the worst was breaking one of the fiddly arm pieces for my PG W-Gundam Zero Custom :( It would be nice if there were an easier way to get replacement parts!!
Tech support
Last thing I did was lost a couple of bits for my HG Hazel custom. Before that, the worst was breaking one of the fiddly arm pieces for my PG W-Gundam Zero Custom :( It would be nice if there were an easier way to get replacement parts!!
student
http://animesugoi.animeblogger.net/
If I lived in Japan I would check the store out for the water decals. I messed up on mine a long time ago when I first started constructing gundams and tore up a lot of my water decals which is why some of my models aren't as good looking as they could be.
student
http://animesugoi.animeblogger.net/
If I lived in Japan I would check the store out for the water decals. I messed up on mine a long time ago when I first started constructing gundams and tore up a lot of my water decals which is why some of my models aren't as good looking as they could be.
student
http://animesugoi.animeblogger.net/
If I lived in Japan I would check the store out for the water decals. I messed up on mine a long time ago when I first started constructing gundams and tore up a lot of my water decals which is why some of my models aren't as good looking as they could be.
student
http://animesugoi.animeblogger.net/
If I lived in Japan I would check the store out for the water decals. I messed up on mine a long time ago when I first started constructing gundams and tore up a lot of my water decals which is why some of my models aren't as good looking as they could be.
Student Engineer
http://www.tgwnetohh.blogspot.com/
Looking at those pictures made me die a little inside =/ (no shops of that nature anywhere near Philadephia, PA)
The most common parts I have broken are two piece hands and waist parts. If the damage isn't bad I usually repair the parts myself, but I am too careful not to permanently break anything, or else I couldn't finish the kit!
Student Engineer
http://www.tgwnetohh.blogspot.com/
Looking at those pictures made me die a little inside =/ (no shops of that nature anywhere near Philadephia, PA)
The most common parts I have broken are two piece hands and waist parts. If the damage isn't bad I usually repair the parts myself, but I am too careful not to permanently break anything, or else I couldn't finish the kit!
Student Engineer
http://www.tgwnetohh.blogspot.com/
Looking at those pictures made me die a little inside =/ (no shops of that nature anywhere near Philadephia, PA)
The most common parts I have broken are two piece hands and waist parts. If the damage isn't bad I usually repair the parts myself, but I am too careful not to permanently break anything, or else I couldn't finish the kit!
Student Engineer
http://www.tgwnetohh.blogspot.com/
Looking at those pictures made me die a little inside =/ (no shops of that nature anywhere near Philadephia, PA)
The most common parts I have broken are two piece hands and waist parts. If the damage isn't bad I usually repair the parts myself, but I am too careful not to permanently break anything, or else I couldn't finish the kit!
Lowlife
http://www.mistakesofyouth.com
Dirty doujin?
Lowlife
http://www.mistakesofyouth.com
Dirty doujin?
Lowlife
http://www.mistakesofyouth.com
Dirty doujin?
Lowlife
http://www.mistakesofyouth.com
Dirty doujin?
Plamo Addict
http://plamoaddiction.blogspot.com/
Broken the finger and bazooka handle joint of my PG RX17-2 and the shield connection joint of my PG MSZ 006. i live in japan so i could order then again but im just too lazy. think i might check that shop out next time im in tokyo. thanks for that.
Plamo Addict
http://plamoaddiction.blogspot.com/
Broken the finger and bazooka handle joint of my PG RX17-2 and the shield connection joint of my PG MSZ 006. i live in japan so i could order then again but im just too lazy. think i might check that shop out next time im in tokyo. thanks for that.
Plamo Addict
http://plamoaddiction.blogspot.com/
Broken the finger and bazooka handle joint of my PG RX17-2 and the shield connection joint of my PG MSZ 006. i live in japan so i could order then again but im just too lazy. think i might check that shop out next time im in tokyo. thanks for that.
Plamo Addict
http://plamoaddiction.blogspot.com/
Broken the finger and bazooka handle joint of my PG RX17-2 and the shield connection joint of my PG MSZ 006. i live in japan so i could order then again but im just too lazy. think i might check that shop out next time im in tokyo. thanks for that.
Student
http://www.legendaryTurtle.deviantart.com
mmmmmm, sweet deliious gunpla action. ^^
ahaha water decals, i covered my strike rouge in them becuase i couldnt find the ice cream pink color i needed and was too lazy to make my own. (i also followed ur gunpla building guide to the letter)
looking forward to seeing ur mg strike freedom and wing! i need to start on my strike freedom too. XD
Student
http://www.legendaryTurtle.deviantart.com
mmmmmm, sweet deliious gunpla action. ^^
ahaha water decals, i covered my strike rouge in them becuase i couldnt find the ice cream pink color i needed and was too lazy to make my own. (i also followed ur gunpla building guide to the letter)
looking forward to seeing ur mg strike freedom and wing! i need to start on my strike freedom too. XD
Student
http://www.legendaryTurtle.deviantart.com
mmmmmm, sweet deliious gunpla action. ^^
ahaha water decals, i covered my strike rouge in them becuase i couldnt find the ice cream pink color i needed and was too lazy to make my own. (i also followed ur gunpla building guide to the letter)
looking forward to seeing ur mg strike freedom and wing! i need to start on my strike freedom too. XD
Student
http://www.legendaryTurtle.deviantart.com
mmmmmm, sweet deliious gunpla action. ^^
ahaha water decals, i covered my strike rouge in them becuase i couldnt find the ice cream pink color i needed and was too lazy to make my own. (i also followed ur gunpla building guide to the letter)
looking forward to seeing ur mg strike freedom and wing! i need to start on my strike freedom too. XD
Student/Writer/Editor
http://emcreations.wordpress.com/
I've broken and lost lots of parts. They usually get lost while I'm building the kit. Considering how I only build my gundam in my tidy room, I'm confused where all of them could have disappeared to. So far, I've ordered an extra rifle and hands from the PG strike to mod'd onto my other 1/60 models. I'm thinking about order the weapon systems from the 1/60 strike and mod them for the PG. Would be nice if we had a shop here...
Student/Writer/Editor
http://emcreations.wordpress.com/
I've broken and lost lots of parts. They usually get lost while I'm building the kit. Considering how I only build my gundam in my tidy room, I'm confused where all of them could have disappeared to. So far, I've ordered an extra rifle and hands from the PG strike to mod'd onto my other 1/60 models. I'm thinking about order the weapon systems from the 1/60 strike and mod them for the PG. Would be nice if we had a shop here...
Student/Writer/Editor
http://emcreations.wordpress.com/
I've broken and lost lots of parts. They usually get lost while I'm building the kit. Considering how I only build my gundam in my tidy room, I'm confused where all of them could have disappeared to. So far, I've ordered an extra rifle and hands from the PG strike to mod'd onto my other 1/60 models. I'm thinking about order the weapon systems from the 1/60 strike and mod them for the PG. Would be nice if we had a shop here...
Student/Writer/Editor
http://emcreations.wordpress.com/
I've broken and lost lots of parts. They usually get lost while I'm building the kit. Considering how I only build my gundam in my tidy room, I'm confused where all of them could have disappeared to. So far, I've ordered an extra rifle and hands from the PG strike to mod'd onto my other 1/60 models. I'm thinking about order the weapon systems from the 1/60 strike and mod them for the PG. Would be nice if we had a shop here...
CEO MIrai Inc
http://www.dannychoo.com/profile/eng/
Ken,
A ghost?
Wildarms,
Not dirty at all - just ero ^^;
Char,
I hear you.
Marvin,
You Japanese is spot on!
CEO MIrai Inc
http://www.dannychoo.com/profile/eng/
Ken,
A ghost?
Wildarms,
Not dirty at all - just ero ^^;
Char,
I hear you.
Marvin,
You Japanese is spot on!
CEO MIrai Inc
http://www.dannychoo.com/profile/eng/
Ken,
A ghost?
Wildarms,
Not dirty at all - just ero ^^;
Char,
I hear you.
Marvin,
You Japanese is spot on!
CEO MIrai Inc
http://www.dannychoo.com/profile/eng/
Ken,
A ghost?
Wildarms,
Not dirty at all - just ero ^^;
Char,
I hear you.
Marvin,
You Japanese is spot on!
Otaku
I used to lose a ton of pieces, but now I made a little shell, so when I cut the peices out they don't fly all over the place...And on the subject of the MG Wing Gundam; I love that kit, but Is so rare where I live!! It's too bad too becuasuse it's a really loose kit...all the places move, but not how you want them to... :(
Otaku
I used to lose a ton of pieces, but now I made a little shell, so when I cut the peices out they don't fly all over the place...And on the subject of the MG Wing Gundam; I love that kit, but Is so rare where I live!! It's too bad too becuasuse it's a really loose kit...all the places move, but not how you want them to... :(
Otaku
I used to lose a ton of pieces, but now I made a little shell, so when I cut the peices out they don't fly all over the place...And on the subject of the MG Wing Gundam; I love that kit, but Is so rare where I live!! It's too bad too becuasuse it's a really loose kit...all the places move, but not how you want them to... :(
Otaku
I used to lose a ton of pieces, but now I made a little shell, so when I cut the peices out they don't fly all over the place...And on the subject of the MG Wing Gundam; I love that kit, but Is so rare where I live!! It's too bad too becuasuse it's a really loose kit...all the places move, but not how you want them to... :(
apple store slave
u bought a wing zero custom, i got the same one, be careful the wings are kinda articulate and i broke a (m)peg and now i have one wing in a permanent position T.T
apple store slave
u bought a wing zero custom, i got the same one, be careful the wings are kinda articulate and i broke a (m)peg and now i have one wing in a permanent position T.T
apple store slave
u bought a wing zero custom, i got the same one, be careful the wings are kinda articulate and i broke a (m)peg and now i have one wing in a permanent position T.T
apple store slave
u bought a wing zero custom, i got the same one, be careful the wings are kinda articulate and i broke a (m)peg and now i have one wing in a permanent position T.T
CEO MIrai Inc
http://www.dannychoo.com/profile/eng/
War God,
AFAIK = As Far As I Know
CEO MIrai Inc
http://www.dannychoo.com/profile/eng/
War God,
AFAIK = As Far As I Know
CEO MIrai Inc
http://www.dannychoo.com/profile/eng/
War God,
AFAIK = As Far As I Know
CEO MIrai Inc
http://www.dannychoo.com/profile/eng/
War God,
AFAIK = As Far As I Know
http://www.marvinryan.com
どうもありがとうございますダニさん。
http://www.marvinryan.com
どうもありがとうございますダニさん。
http://www.marvinryan.com
どうもありがとうございますダニさん。
http://www.marvinryan.com
どうもありがとうございますダニさん。
Plamo Addict
http://plamoaddiction.blogspot.com/
finally found this place on the weekend. I think its called "Yellow Submarine" but im not sure. No PG parts tho! rats! but the display of gundams was impressive. Beautiful Strike Noir and Akatsuki
Plamo Addict
http://plamoaddiction.blogspot.com/
finally found this place on the weekend. I think its called "Yellow Submarine" but im not sure. No PG parts tho! rats! but the display of gundams was impressive. Beautiful Strike Noir and Akatsuki
Plamo Addict
http://plamoaddiction.blogspot.com/
finally found this place on the weekend. I think its called "Yellow Submarine" but im not sure. No PG parts tho! rats! but the display of gundams was impressive. Beautiful Strike Noir and Akatsuki
Plamo Addict
http://plamoaddiction.blogspot.com/
finally found this place on the weekend. I think its called "Yellow Submarine" but im not sure. No PG parts tho! rats! but the display of gundams was impressive. Beautiful Strike Noir and Akatsuki
Plamo Addict
http://plamoaddiction.blogspot.com/
oh and yeah it costs money to order parts over mail. i think it says 100 yen per part in the assembly guides. this place however sells whole bags of parts for 300 yen. but its hard to get the specific parts that you need it seems. just have to get lucky.
Plamo Addict
http://plamoaddiction.blogspot.com/
oh and yeah it costs money to order parts over mail. i think it says 100 yen per part in the assembly guides. this place however sells whole bags of parts for 300 yen. but its hard to get the specific parts that you need it seems. just have to get lucky.
Plamo Addict
http://plamoaddiction.blogspot.com/
oh and yeah it costs money to order parts over mail. i think it says 100 yen per part in the assembly guides. this place however sells whole bags of parts for 300 yen. but its hard to get the specific parts that you need it seems. just have to get lucky.
Plamo Addict
http://plamoaddiction.blogspot.com/
oh and yeah it costs money to order parts over mail. i think it says 100 yen per part in the assembly guides. this place however sells whole bags of parts for 300 yen. but its hard to get the specific parts that you need it seems. just have to get lucky.
Samurai
http://l5r.skillze.com
Too bad I live in the Philippines and can't buy those parts. I need to fix my brother's MG Strike Freedom's wings.
Samurai
http://l5r.skillze.com
Too bad I live in the Philippines and can't buy those parts. I need to fix my brother's MG Strike Freedom's wings.
Samurai
http://l5r.skillze.com
Too bad I live in the Philippines and can't buy those parts. I need to fix my brother's MG Strike Freedom's wings.
Samurai
http://l5r.skillze.com
Too bad I live in the Philippines and can't buy those parts. I need to fix my brother's MG Strike Freedom's wings.
Online retailer; student
http://www.myspace.com/kawudo
Gosh that's insane, I wish there was a store like that down here in LA. I can't even find a decent model kit place let alone a good anime place with model kits other than seed......*sigh
Online retailer; student
http://www.myspace.com/kawudo
Gosh that's insane, I wish there was a store like that down here in LA. I can't even find a decent model kit place let alone a good anime place with model kits other than seed......*sigh
Online retailer; student
http://www.myspace.com/kawudo
Gosh that's insane, I wish there was a store like that down here in LA. I can't even find a decent model kit place let alone a good anime place with model kits other than seed......*sigh
Online retailer; student
http://www.myspace.com/kawudo
Gosh that's insane, I wish there was a store like that down here in LA. I can't even find a decent model kit place let alone a good anime place with model kits other than seed......*sigh
Online retailer; student
http://www.myspace.com/kawudo
Gosh that's insane, I wish there was a store like that down here in LA. I can't even find a decent model kit place let alone a good anime place with model kits other than seed......*sigh
Online retailer; student
http://www.myspace.com/kawudo
Gosh that's insane, I wish there was a store like that down here in LA. I can't even find a decent model kit place let alone a good anime place with model kits other than seed......*sigh
Online retailer; student
http://www.myspace.com/kawudo
Gosh that's insane, I wish there was a store like that down here in LA. I can't even find a decent model kit place let alone a good anime place with model kits other than seed......*sigh
Online retailer; student
http://www.myspace.com/kawudo
Gosh that's insane, I wish there was a store like that down here in LA. I can't even find a decent model kit place let alone a good anime place with model kits other than seed......*sigh
College Student :D
:O
How useful!!
I've broken atleast one part from each model I have lol.
Is there ayway that we can pay you and you buy it and send it to us, Danny?
Thanks!!
College Student :D
:O
How useful!!
I've broken atleast one part from each model I have lol.
Is there ayway that we can pay you and you buy it and send it to us, Danny?
Thanks!!
College Student :D
:O
How useful!!
I've broken atleast one part from each model I have lol.
Is there ayway that we can pay you and you buy it and send it to us, Danny?
Thanks!!
College Student :D
:O
How useful!!
I've broken atleast one part from each model I have lol.
Is there ayway that we can pay you and you buy it and send it to us, Danny?
Thanks!!
Online retailer; student
http://www.myspace.com/kawudo
It's going to be very hard to get a (one) specific part from Bandai considering their all the way in Japan, I'm assuming when they manufacture their model kits and make extra trees of parts. And just send them to shops n' whatnot, best thing to do is either go to Japan and pick some up....or buy a whole 'nother kit. Which both would be a waist of time and money, so best advice is to be very careful when building/posing model kits. Don't be ashamed if you broke a part, cus it happens to everybody. We think models are action figures so we try to pose them n' whatnot like they are
Online retailer; student
http://www.myspace.com/kawudo
It's going to be very hard to get a (one) specific part from Bandai considering their all the way in Japan, I'm assuming when they manufacture their model kits and make extra trees of parts. And just send them to shops n' whatnot, best thing to do is either go to Japan and pick some up....or buy a whole 'nother kit. Which both would be a waist of time and money, so best advice is to be very careful when building/posing model kits. Don't be ashamed if you broke a part, cus it happens to everybody. We think models are action figures so we try to pose them n' whatnot like they are
Online retailer; student
http://www.myspace.com/kawudo
It's going to be very hard to get a (one) specific part from Bandai considering their all the way in Japan, I'm assuming when they manufacture their model kits and make extra trees of parts. And just send them to shops n' whatnot, best thing to do is either go to Japan and pick some up....or buy a whole 'nother kit. Which both would be a waist of time and money, so best advice is to be very careful when building/posing model kits. Don't be ashamed if you broke a part, cus it happens to everybody. We think models are action figures so we try to pose them n' whatnot like they are
Online retailer; student
http://www.myspace.com/kawudo
It's going to be very hard to get a (one) specific part from Bandai considering their all the way in Japan, I'm assuming when they manufacture their model kits and make extra trees of parts. And just send them to shops n' whatnot, best thing to do is either go to Japan and pick some up....or buy a whole 'nother kit. Which both would be a waist of time and money, so best advice is to be very careful when building/posing model kits. Don't be ashamed if you broke a part, cus it happens to everybody. We think models are action figures so we try to pose them n' whatnot like they are
Student
If only they had a store like this is the US...then I might be able to experience Gundam Inochi. =P
Student
If only they had a store like this is the US...then I might be able to experience Gundam Inochi. =P
Student
If only they had a store like this is the US...then I might be able to experience Gundam Inochi. =P
Student
If only they had a store like this is the US...then I might be able to experience Gundam Inochi. =P
StUDenT
can anyone tell me how to order spae pars from that shop plz??
Teleinterviewer/College Student
http://www.myspace.com/sigsauerp245
Do, or anyone else, know where I can get spare Gundam parts? I screwed up painting the shield of a HG 1/100 RX-78 GP01Fb and need to get a new one. Thanks.
http://anime-horizon.blogpsot.com
Danny,
This is FH from Anime& Manga Horizon.
My brother got MG destiny and he broke a small part cause too fragile. I was wondering if I can ask u to pop over the shop and buy parts for it. I know it's troublesome and normally busy people like you dont do this. But I'd ask anyway since my bro's pretty depressed. Hope u can reply.
Hikikomori in the making
http://supermariabros.deviantart.com/
I just hate it when I lose/break parts... It's just too hard to repair and it's hard to find spare parts here... I need to be in japan Naow!
Hmm Does this store send parts to US? I bought a PG Strike and it was actually missing one piece (part of the cockpit door) and it is impossible to get Bandai to send a response to an email. It's been about 2 weeks since I asked them if I could purchase a new part -.-
Processing Executive
heaven...now I really am going to Japan. Wonder what I should do there. I want to spend my life there forever. I wish I was japanese!!!!!!!!!!!
Engineer
It will be really nice and helpful if there is a online spare store.
Student
http://beamknight87blog.blogspot.com/
I screwed up big time part of the waist of my Unicorn, also, its V fin is so thin that it looks almost destined to break eventually. However, I try to be extremely careful to avoid any damage to my models
Student Engineer
http://www.tgwnetohh.blogspot.com/
I will totally RAID that store and buy so much Gunpla when I visit Japan it ain't even funny!
Typically with the models I build, I will scratchbuild a new part if something breaks. Say I snap a antannae, I will first proclaim my dissatisfaction by yelling an explitive, then I may use brass rod to replace it.
For more complicated parts, I am:
a) screwed
b) try to scatchbuild
c) deal with it
d) order new parts
Tamiya and Revell are good about getting me what I need.
freelance photographer
http://www.jorgehinojosa.spaces.live.com
There is nothing like that in this city, even finding figures is a pain
Polytechnic Junior, Bronze Lifesaving Trainee, Mech Designer In-training.
http://thehangerbay.wordpress.com/
I need to visit somewhere similar... My S. Freedom is more thrashed than Destiny after that tussle with I. Justice.
Student/Part-timer
Lol, I know one of my friends, and he could practically live there. His dorm has like, Gunpla hanging from the ceiling, and it pokes your eyes if you're not careful.
IT engineer
http://secretzone81.wordpress.com/
Hi Danny,
I believe that shop is at 4th Floor of Akiba Radio Kaikan? The shop name should be yellow submarine :)
Not really into Gundam or building models, too bad I never got to watch the original series so never got into it, but here is so huge.
Macross is another story, except the 7 series, are you watching the F one?
http://www.marvinryan.com
love this store. I haven't said this but thank you for this post Danny. really help me find all those cool gundam parts and stuff during my visit to Akiba.
IT TechGuy
http://starboykb.blogspot.com
Indeed, if there is store like that online. it will be good looking for missing parts.
Fulltime Otaku // Student
http://otakuscience.sharper.nl/wordpress
It would be nice for adding great modifications. I wish there was a shop like that near my area. Then i already what I needed for my kits.
Medical Student
Does anyone know if there is any such store online that uses money orders?
student
man.... >.< i wish i had a shop like this near my house >.<
Figurine & Gundam Hunter
I wish there is a shop like this in malaysia so i can kit bash my gundam.
bum,hachi roku driver
that shop is perfect since i have a habit of breaking parts and losing them too. Damn i wish i had money to buy the either the master grade or the perfect grade version of wing zero, so much envy.
student
http://haruka-moe-tan.blogspot.com/
I wish they had one of those in Canada
Grocery Store Clerk
yo should not need spare parts i fyou put it together right the first time.